Dayton band saw 3z360g manual

Dayton Band Saw 3z360d Manual - Local

Thought the course blade would work well for the 2' to 3" steel stock I have been cutting.

Bandsawmanuals – Just another WordPress

Although the blade appears perfectly purpendicular, every cut I have made with the new blade comes out about 10 degrees from purpendicular, bowing the blade quite a bit by the end of the cut. The used machine of course came with no instructions and the guy I bought it from said he did not own it very long and had no advice. When I tension the new blade tht it either stops the drive motor or the cutting blade starts coming off the non drive pulley.

<b>Dayton</b> Horizontal Metal Cutting <b>Band</b>

Dayton Horizontal Metal Cutting Band

I recently purchased a used Dayton 3Z360C Bandsaw that appears to be American Made in Chicago with a cutting capacity of 4 1/2" by 5 1/2".

Dayton Bandsaw Question? Archive -

The bandsaw worked specactular with perfectly straht cuts but the blade it came with was fairly fine maybe 14 TPI but it was well worn with some teeth missing.

Dayton band saw 3z360g manual:

Rating: 97 / 100

Overall: 98 Rates